Is a Flat Rope Safe?
“My friend said he wouldn’t climb with me unless I cut the end off my rope. He said that that my rope looked “flat” when he pinched it in half. What is he talking about and how do you know when to cut a rope?”
Your rope is flat, well not completely flat, but it has lost its roundness from being weighted over a carabiner again and again. This type of wear usually happens within the first 20 feet of the rope ends, since that is where a rope takes the beating over a carabiner either in a fall or “take” scenario.
A deformed, or flat, section should be cut out. You should also cut out rope ends that are badly fuzzed or core shot.
A trimmed rope will naturally be shorter, so beware: Your 60-meter cord will no longer let you lower from a 30-meter pitch. Wrap a piece of cloth tape around each end of the trimmed rope and write the new length on the tape. If your rope has a middle marker you need to trim both rope ends the same amount—if you only trim one end, then the middle mark will no longer be in the middle, and that could spell disaster for rappelling or lowering. Trimming both rope ends will keep the middle mark in the middle. As always, to prevent your being lowered off the end of a rope or rappelling off the end(s), knot the free end of the rope(s).
This Gear Guy question appeared in Rock and Ice issue 248 (February 2018).
Got a question? Email: firstname.lastname@example.org
Do It Yourself Fruit Boots
I’m a poor working s.o.b. and can’t spring $400 to $600 for a pair of sweet fruit boots. Can I make my own? ——Jimmy Astor, via rockandice.com Get your freak on! With a bit … Continue reading “Do It Yourself Fruit Boots”
Stiff Shoes or Soft Shoes? That is the Question
I’ve been climbing in a stiff shoe for three years. Would I climb better in a soft slipper? —JN via rockandice.com Climbing shoes are the only piece of gear that can make you climb … Continue reading “Stiff Shoes or Soft Shoes? That is the Question”